Your image

MANUREWA BRANCH SEWER

Client Watercare Services Ltd
Project Value $5.2 Million

Description : Construction of approximately 1.8km of 625mm ID trunk sewer in the carriageway using open trench, guided auger boring and directional drilling methods. This project also included the construction of 20 shafts and manholes up to 10m deep.

Relevant features
Our contribution to the project included the installation of storm and wastewater pipelines near Coxhead Road, Auckland and had five main components:
  
• Guided auger boring methods were used to install the pipeline in the deeper sections of the project. Drive lengths were up to 140m.
• The average grade of the pipeline was 0.4%.
• The ground conditions comprised of very hard sandstone in excess of 25MPa, with very high ground water pressure.
• The deep shafts were constructed using steel soldier piles and timber lagging.
• The pipeline route was via level 2 roads, so extensive traffic and stakeholder management was required.

Your image

THE PARADE STORMWATER OUTFALL AND PIPELINE
Client: Auckland Council
Project Value: $5.3 million

This project involved the installation of a new stormwater pipeline and ...

Your image

BOSTON ROAD STORMWATER PROJECT
Client: Metrowater
Project Value: $2.5 million

Installation of 250m of 1050 diameter and 150m of 1350 diameter pipes using trenchless techniques...

Your image

TORBAY TUNNEL
Client: North Shore City
Project Value: $6 million

This project involved the construction of a new trunk sewer tunnel as part of the North Shore City’s strategic wastewater undertaking, Project Care,...